A. Start approximately 46‖ from
floor. Select the appropriate
installation template
according to the length of the
backset. Fold and apply the
template to the edge of the
door bevel. Mark the center
point of the cylinder hole on
the door face, and then mark
the center point of the
deadbolt hole on door edge, as
indicated on the template.
B. For installation of
combination set (door handle
and deadbolt), it is
recommended that the
distance is 5 ½‖ between the
two center points.
C. Mark the center points of the
two small holes on the door
face for the two upper fixing
posts mounted on the top
plate of the outdoor unit, as
indicated on the installation
template.
Comentários a estes Manuais