None 16080 Manual de Instruções descarregar pdf (Página 5)

5 HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Assembly (continued)

Connecting the small tube and

handle to the arm assembly

Connecting the small tube, handle

and arm assembly to the upper

tube

□ Tighten the small tube (E) onto the arm assembly (A).

□ Insert the handle (D) into the arm assembly (A) as shown

and secure the two hex screws (G) by using the hex wrench

(F).

□ Insert the small tube (E) into the upper tube (H) as shown

and secure the three hex screws (G) by using the hex

wrench (F).

NOTE: Do not twist the power cord (L).

Installing the shade

Installing the light bulb

□ Unscrew the socket ring (C) from the socket of the arm

assembly (A), and place the shade (B) onto the socket.

Replace and tighten the socket ring (C).

□ Loosen the knob on the side of the arm assembly (A) to

adjust the arm to the desired location then tighten the knob

to lock into place.

□ Tilt the socket on the arm assembly (A) to the desired

location.

NOTE: Remove the plastic cover on the shade before using.

□ Screw a 100W maximum 3-way standard Type A bulb (sold

separately) into the socket of the arm assembly (A).

NOTE: You can also use one 25W maximum 3-way SBCFL

bulb (sold separately). Do not exceed the recommended

wattage.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Sem comentários

None 16080 Manual de Instruções Página 5