None LS Manual de Instruções

NORTHSTAR TRAILERS Assembly Guide for LOADSTAR Trailer Congratulations! You are the proud owner of a NORTHSTAR trailer. Please follow the instr

ROTATE THE TRAILER TO AN UPRIGHT POSITION. Position the trailer so the tires are on the ground. More than one person is required to rotate the trailer

INSTALL RUNNING LIGHTS a. The white wire from the harness is not needed for ground on this light and can be capped off (with wiring connector (

STEP 8: INSTALL SIDE RAILS & CORNER BRACKETS Note: fasten bolts to finger-tightness until the side braces, brackets and side-rails are all in

YOU ARE FINISHED! We hope that you enjoy your NORTHSTAR TRAILER. Please contact us at 1-855-375-3088 or email [email protected] if you hav

TRAILER PARTS LIST Part No. Part Description Qty. 1 Frame (deck) 1 2 Tongue (with wiring harness) and Coupler (hitch) 1 3 Top Rail 1 4 Front Corner

IMAGES OF PARTS AND HARDWARE

INVERTED ASSEMBLY This trailer requires inverted assembly. (Assembled upside-down). Start by turning the trailer frame upside-down so the

a. Flip the trailer frame (1) upside-down, and place the frame on a waist-high table or other elevated supports in order to facilitate assembly. b.

STEP 2: WIRE ASSEMBLY Note: when standing at the back of the trailer looking toward the front, with the trailer still inverted, the wiring harness

STEP 3: ATTACH WHEELS TO AXLE Note: the hub assembly comes attached to the wheels with pre-lubricated bearings and washers. Upon removing the dust-ca

STEP 4: ATTACH TONGUE TO FRAME Remember: the trailer is still upside-down, so all components must be installed upside-down. a. *Make sure that